Rated drilling depth
6500m.
Slingshot substructure
Height: 7,62m
Capacity of a candlestick: 226t
Mast
National Oilwell Varco
Height: 43,3m
Load capacity:408t
Max. wind resistance:408t
Load on the ground:0,4 kg/cm2
Crown block
National Oilwell Varco С415TU
Number of pulleys 7 (6 +1) 6 - 50“(1270mm) , 1 - 60“ (1524mm)
Rope: 1 3/8” (35mm)
Load capacity:459t
Travelling block
National Oilwell Varco 650TU500
Number & diameter of pulleys: 6 - 50"(1270mm)
Load capacity:459t
Hook
YG450-8A
Load capacity:408t
Swivel
СН-500
Load capacity:500t
I.D. of the stem: 75mm
Working pressure: 35MPa/ 350bar
TOP DRIVE
Aker PDT-500-AC-800HP
Load capacity:500t
Working pressure: 34,5MPa/ 345bar
I.D. of the stem: 76mm
Max. torque / at rotation: 40600Nm/143 rot/min.
Power: 800НР
Drawworks
D2000U.
Nom. Power: 1470 kW (2000HP)
Engines:  Joilet 2х 590kW (1085HP)
Rotary Table
National Oilwell Varco ZP-275, 27 1/2" (698,5mm) 
Load capacity:408t
Drive type - From the winch, with a choice of speeds, a cardan.
Rotation range: 0-250 rot/min.
Power plant
Diesel Engines: 1x CAT3512B 1310kW. Generator:1200kW,1714kVA,600V,50Hz
2x CAT3512B 1310kW. Generator:NOV 1400kW,1750kVA,600V,50Hz
Conversion system
Varco SCR:1
Mud system
Mud pumps: 2x NOV F-1000 (1000HP)
                            1x Gardner Denver PZJ-9 (1000HP)
Shale shaker: 4x Mongoose
Desander: LVS-5
Desilter: LVS-5
Degasser:DW-1
Mud cleaner: LVS-5
Total volume, including sand traps: 270 m3
The volume of working tanks: 270 m3
Number of working tanks  (4)
Number of receiving tanks (4)
The volume of receiving tanks: 270 m3
The volume of sand traps tanks: 20 m3
Topping capacity (1) - 30 m3
BOP
BOP 70MPa for drilling
Preventer F35-70 China
Muffler unit 80x70 MPa
Throttle unit 80x70 MPa
Muffler & throttle unit 80x70 MPa
Ejection lines for drilling  Ø127mm
Preventer  HDU-9х70, «Romania»
Muffler & throttle unit 50x70 MPa
Torch discharge lines PCP 73
KNDP
4500m ТPDP 127x 9,19  S-135  R-II.
1800m ТPDP 101,6x8,38  G-105  R-ІІ.
1400m ТPDP 88,9x9,19  S-135  R-ІІ.